ASSEMBLY
Tool:
Wrench 13-15
Step 1
Stand up the base of the machine by separating the Rear and Front Frames
(1, 2). Pull the Rear and Front Frames (1, 2) apart from each other. Align pin
holes for inserting the Ø10x110L Safety Pin (22) then insert the Ø10x110L
Safety Pin (22) into the holes on the Rear and Front Frames (1, 2) to lock the
frames in place.
Attach the Front Stabilizer (31) onto the Front Frame (2) with two M8 Hexagon
Nuts Cap (29) and Ø8.2xØ22.2 Curve Washers (30). Tighten nut cap with the
Wrench provided.
Attach the Rear Stabilizer (3) onto the Rear Frame (1) with two M8 Hexagon
Nuts Cap (29) and Ø8.2xØ22.2 Curve Washers (30). Tighten nut cap with the
Wrench provided.
Hardware:
(22) Safety Pin
(29) Hexagon Nut Cap M8
(30) Curve Washer
Ø10x110L
4 PCS
Ø8.2xØ22.2
1 PC
4 PCS
9