Computer; Specifications; How To Install The Batteries - Exerpeutic Folding Upright Bike Owner's Manual

Folding upright bike with pulse
Table of Contents

Advertisement

SPECIFICATIONS:

TIME --------------------------------------- 0:00-99:59 MIN: SEC
SPEED ------------------------------------ 0.0-999.9 ML/H
DISTANCE ------------------------------- 0.0-999.9 ML
CALORIE --------------------------------- 0.0-999.9 KCAL
ODOMETER ----------------------------- 0.0-999.9 ML
PULSE ------------------------------------ 40-240 BEATS/MIN
COMPUTER FUNTIONS:
AUTO ON/OFF: If you leave the computer idle for 4 minutes, the power will
shut off automatically.
SCAN: Press the button until the screen displays SCAN; the computer will
automatically scan the function of TIME, ODOMETER, CALORIE, PULSE,
SPEED, and DISTANCE, every 6 seconds.
TIME: Displays your elapsed workout time in minutes and seconds. The
computer will automatically count up from 0:00 to 99:59 in one second
intervals.
SPEED: Displays your workout speed in miles per hour.
DISTANCE: Displays the accumulative distance traveled during each
workout up to a maximum of 999.9 miles.
CALORIE: The computer will estimate the cumulative calories burned at any
given time during your workout. The computer will count up from 0.0 to
999.9 calories.
ODOMETER: Displays the total accumulative distance traveled during each
workout up to a maximum of 999.9 miles. The data values of ODOMETER
can not be reset to zero by pressing and holding the button more than 2
seconds. If user takes out the batteries from the computer, the
ODOMETER data values will reset to zero.
PULSE: The computer will display your pulse rate in beats per minute after
holding both hands on handlebar grip sensors during exercise. To ensure
the pulse readout is more precise, please always hold on to the handlebar
grip sensors with two hands instead of one.
RESET: pressing and holding the button more than 2 seconds will reset all
functional values to zero except the odometer data values.

HOW TO INSTALL THE BATTERIES:

1.
Remove the battery cover at the rear of computer.
2.
Place two "SIZE-AAA" batteries into the battery housing.
3.
Insure batteries are correctly positioned and battery springs are in
proper contact with batteries.
4.
Re-install the battery cover.
5.
If the display is illegible or only partial legible, remove batteries and wait
15 seconds before reinstalling.

COMPUTER

13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1200

Table of Contents