Step 4
Connect the Sensor Wire (15) from the Rear Frame (1) to the wire that comes
from the Computer (9).
Attach the Handlebar (4) into the Rear Frame (1) with four M6x12 Hexagon
Socket Bolts (73) and four Ø6.2 Spring Washers (74). Tighten bolts with the
Allen Wrench with Phillips Screwdriver provided.
Attach the Holder (62) onto the Rear Frame (1) with two M4x10L Screws (66).
Tighten screws with the Allen Wrench with Phillips Screwdriver provided.
Hardware:
(66) Screw M4x10L
2 PCS
ASSEMBLY
Tool:
Allen Wrench with Phillips
Screwdriver
(73) Hexagon Socket Bolt
M6x12
4 PCS
12
(74) Spring Washer Ø6.2
4 PCS