DS-720xHTI-Kx DVR User Manual
13.2 Configuring Privacy Mask
Purpose
You can configure the four-sided privacy mask zones that cannot be viewed or recorded by the operator.
1. Go to Menu > Cameras Setup > Privacy Mask.
2. Select the camera for which to set the privacy mask.
3. Check the Enable Privacy Mask checkbox to enable this feature.
Figure 13-2 Privacy Mask Settings Interface
4. Use the mouse to draw a zone on the window. The zones will be marked in different frame colors.
Up to four privacy mask zones can be configured, and the size of each area can be adjusted.
5. The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear
Zone1-4 icons on the right side of the window, or click Clear All to clear all zones.
Figure 13-3 Set Privacy Mask Area
6. Click Copy to copy the privacy mask settings to other cameras.
7. Click Apply to save the settings.
161