Cluster Installation - IBM SPSS Data Collection Installation Manual

42
Chapter 3
– When changing Configure for FIPS 140-2 Compliance from disabled to enabled, the
parameters outlined in the first bullet point are employed.
Refer to the
(http://csrc.nist.gov/groups/STM/cmvp/standards.html#02)
regarding FIPS 140-2.
Notes: When FIPS 140-2 is configured for IBM SPSS Data Collection products, the applications
adhere to the password protection security protocols that are defined on the Interviewer Server.
For example, if the Interviewer Server is configured for MD5 security, the client-side applications
will also use MD5 security for password protection, regardless of whether or not the
FIPS 140-2 Compliance
When Microsoft .NET Framework 3.5 SP1 is installed on a computer that is running Windows 7
or Windows Server 2008 R2, and FIPS enabled, you cannot run an ASP.NET 3.5-based
application that use a ScriptManager control. You can download a
(https://connect.microsoft.com/VisualStudio/Downloads/DownloadDetails.aspx?DownloadID=27494)
that addresses this issue.
The Start Copying Files page lists the services you have chosen to install and the name of the
E
database server you have chosen to use. If these settings are correct, click
and step back through the pages to make the necessary changes.
During the installation process you may see a number of DOS windows open and close. This is
expected behavior and can be ignored.
When the installation has finished, choose whether to restart your machine now or later and click
E
. If you want to run the post-installation steps straight away you must restart your machine
Finish
now.
To complete the installation, you now need to perform the
E

Cluster installation

When you install onto more than one machine you typically follow these steps:
First, log in to the server that will host the Accessories Service and
E
. This file names the machines on which the various services will be installed, and sets up a
central site preparation folder that can be used by other machines in the cluster. The installation
procedure installs not only the services you choose for the machine you have logged in to, but also
the project management components. This machine becomes the Primary DPM server.
Secondly, on each of the machines named in the site preparation file,
E
from the site preparation folder. Always install onto your Accessories servers first, followed by all
Interviewing servers, and finally all Web servers.
National Institute of Standards and Technology
setting was selected during installation.
website for more information
Microsoft Hotfix
. If not, click
Next
post-installation tasks.
create a site preparation file
run the installation program
Configure for
Back