IBM SPSS Data Collection Installation Manual page 165

Register the .srf extension with the mrIWeb virtual folder. There are two ways to do this. Either,
E
run the following command from the command line (type it all on one line not split across lines
as shown here):
C:\Inetpub\AdminScripts\adsutil set W3SVC/1/Root/mrIWeb/ScriptMaps
".srf,[INSTALL_FOLDER]\IBM\SPSS\DataCollection\6\Interviewer Server\Server\mrIWeb\mrIWeb.dll,0,GET,HEA
Or, use Internet Information Services Manager as follows:
From Control Panel select
Administrative Tools > Internet Information Services
In the left-hand frame of the Internet Information Services window, expand the display to show
the contents of your default (or IBM® SPSS® Data Collection Interviewer Server) web site.
Right-click mrIWeb and select Properties.
The mrIWeb dialog box opens.
On the Virtual Directory tab, click
The Application Configuration dialog box opens.
On the Mappings tab click
The Add/Edit Application Extension Mapping dialog box opens.
In Executable, browse to [INSTALL_FOLDER]\IBM\SPSS\DataCollection\6\Interviewer
Server\Server\mrIWeb and select mrIWeb.dll.
In Extension, type
.srf
Select and in the text box, type
Limit to
Click .
OK
Close IIS.
E For each interviewing project, change the InterviewStartURL property so that it uses the .srf file
rather than the .dll file. You will need to do this for new projects too as they are created.
Navigate to
[INSTALL_FOLDER]\IBM\SPSS\DataCollection\6\DDL\Code\Tools\VB.NET\DPM
Explorer.Net and double click DPMExplorer.exe.
Expand the left-hand frame so that you can see the list of projects inside the Projects collection.
Expand the project entry in the left-hand frame and select Interviewer Server. You'll see a list
of project properties in the right-hand frame.
Select InterviewStartURL and, in the lower section of the screen, replace mrIWeb.dll with
mrIWeb.srf.
Click .
Apply
.
Configuration
.
Add
.
GET,HEAD,POST,DEBUG
157
Troubleshooting
.