Network Setup - Planet WRNT-626 User Manual

LED
PWR Green
WLAN Orange
100M Green
WAN
LNK/ACT Green
100M Green
LAN
LNK/ACT Green
2.3

Network Setup

After you install your WNRT-626, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (WNRT-626) automatically. To verify your IP address, please follow the steps below:
1. Click on Start > Run.
Color STATE
On Device power on
Off Device power off
Blinking During boot up procedure
Transmitting or receiving data through the Wireless
Blinking
LAN
Off Wireless LAN is no function
On WAN port is connected at 100Mbps
Off WAN port is disconnected at 100Mbps
On Link is established
Blinking Packets are transmitting or receiving
On LAN is connected to 100Mbps device
Off LAN is disconnected to 100Mbps device
On Link is established
Blinking Packets are transmitting or receiving
Off LAN port is not connected
10
MEANING