Manual Network Setup - Tcp/Ip Configuration; Obtain An Ip Address Automatically - Planet WNRT-300 User Manual

802.11n wireless portable ap/router

Hide thumbs Also See for WNRT-300:

Table of Contents

3.3. Manual Network Setup - TCP/IP Configuration

The default IP address of the WNRT-300 is

255.255.255.0. These values can be changed as you desire in the web UI of the WNRT-300. In this

section, we use all the default values for description.

No matter you want to configure the WNRT-300 via wired or wireless connection, the PC need to be

assigned an IP address first. Before you connect the local PC to the WNRT-300 via wired or wireless

connection, please configure the IP address for your PC in the following two ways first.

Configure the IP address manually

The following sections will introduce how to install and configure the TCP/IP correctly in Windows XP.

First, make sure your Ethernet Adapter is working, and refer to the Ethernet adapter's manual if

needed.

3.3.1. Obtain an IP Address Automatically

If you are sure the DHCP server of WNRT-300 is enabled (the default setting of

set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. And then the

WNRT-300 built-in DHCP server will assign an IP address to the PC automatically.

1) On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2) Double-click the Network Connections icon. Then right-click on the Wireless Network

Connection, and select Properties in the appearing window.

User's Manual of WNRT-300

192.168.1.1,

and the default Subnet Mask is

Figure 3-4

-11-

Router

Mode), you can

Table of Contents