Planet WRNT-626 User Manual page 76

You may press "Refresh" to get the new client table or "Close" to close this dialog
box.
In "Universal Repeater mode", this device can act as a station to connect to
Root AP SSID
a Root AP. You should enter the SSID of the Root AP here.
Site Survey You also can press "Select Site Survey" button to choose wireless network that
exists at the moment you will connect.
You may press "Refresh" to get the new Access Point and select one of them to
click "Done" to connect.
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-626 with new configuration. Please refer to section 4.2.7 for more
76