Ap Bridge-Wds Mode - Planet WRNT-626 User Manual

6.5

AP Bridge-WDS Mode

If you want WNRT-626 to bridge to other WNRT-626 and provide access for other wireless
clients at the same time, you have to set the WNRT-626 to "AP Bridge - WDS". Simply speaking,
"AP Bridge - WDS" function is the combination of "AP mode" and "AP Bridge-Point to Multi-Point
mode".
Parameter Description
Shows the current operation mode. You may set WNRT-626 to other operating
Mode
mode by select other operating mode.
2.4GHz (B): It forces the WNRT-626 to operate in 802.11b only.
2.4GHz (G): It forces the WNRT-626 to operate in 802.11g only.
2.4GHz (N): It forces the WNRT-626 to operate in 802.11n only.
Band 2.4GHz (B+G): It allows the WNRT-626 to operate in 802.11b and 802.11g
simultaneously.
2.4GHz (B+G+N): It allows the WNRT-626 to operate in 802.11b, 802.11g, and
802.11n simultaneously.
The ESSID (up to 32 printable ASCII characters) is the unique name identified in a
WLAN. The ID prevents the unintentional merging of two co-located WLANs.
ESSID
Please make sure that the ESSID of all stations in the same WLAN network are the
same. The default value is "default".
Select the appropriate channel from the list provided to correspond with your
Channel Number
network settings. Channels differ from country to country.
73