Planet WRNT-626 User Manual page 56

Add
Reset
Current Virtual Server Table
Delete Selected
Delete All
Reset
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-626 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
Note: Virtual Server function will have priority over the DMZ function if there
is a conflict between the Virtual Server and the DMZ settings.
Fill in the "Private IP", "Private Port", "Type", "Public Port" and "Comment" of
the setting to be added and then click "Add". Then this Virtual Server setting
will be added into the "Current Virtual Server Table" below. If you find any
typo before adding it and want to retype again, just click "Clear" and the
fields will be cleared.
Click "Reset" will clear your current settings to allows you to enter again.
If you want to remove some items from the "Current Virtual Server Table",
select the MAC addresses you want to remove in the table and then click
"Delete Selected".
If you want remove all items of the table, just click this button.
Click "Reset" will clear your current selections.
56