Planet WRNT-626 User Manual page 48

PIN (as Registrar) setup step:
1. Select Config Mode: "Registrar" on WNRT-626.
2. Fill the PIN code of the other device (as Enrollee that support WPS-PIN setting) into the "configure via
Client Pincode" of WNRT-626.
3. Click the PIN buttons on WNRT-626 and the other device in 2 minutes.
4. If you see the wireless client in the list, WPS-PIN setting is successful.
PIN (as Enrollee) setup step:
1. Select Config Mode: "Enrollee" on WNRT-626.
2. Fill the PIN code of WNRT-626 into the other device (as Registrar).
3. Click the PIN buttons on WNRT-626 and the other device in 2 minutes.
4. If you see the wireless client in the list, WPS-PIN setting is successful.
** As the figure as above, just change two roles.
48