Planet WRNT-626 User Manual page 50

After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press "Continue" for configure other
settings or "Apply" to restart WNRT-626 with new configuration. Please refer to section 4.2.7 for more
information about this screen.
Add/Edit QoS Rule
You can assign packet classification criteria by its source IP range, destination IP range, traffic type,
protocol, and source port range and destination port range parameters. The parameters that you leave as
blank will be ignored. The priority of this rule will be applied to packets that match classification criteria of
this rule. You can limit bandwidth consumed by packets that match this rule or guarantee bandwidth
required by packets that match this rule.
After press Add or Edit button in QoS screen, you will see the web screen below for user to setup their
QoS rule.
Parameters
Rule Name
Bandwidth
Description
Please give a name to the QoS Rule
You can limit the maximum bandwidth consumed by this rule by selecting
"Maximum". You also can reserve enough bandwidth for this rule by
selecting "Guarantee". The unit of bandwidth is Kbps. When we download
data from Internet, the unit of download screen shows is KBps. 1KBps is
equal to 8Kbps. When you enter the bandwidth, please make sure the
number you enter is correct. For example, if you want to limit users
download speed to 50KBps from Internet, you will need to enter 400Kbps in
the configuration.
50