Chapter 6 Wireless Configuration; Ap Mode - Planet WRNT-626 User Manual

In this chapter, you can Enable/Disable wireless function and configure the WNRT-626 work in
different operating mode. Please refer to below sections to know the details configuration of
each operating mode.
6.1

AP Mode

This mode is set to WNRT-626 by default. It served as a transparent Media Access Control
(MAC) bridge between wired and wireless network.
Parameter Description
Shows the current operation mode. You may set WNRT-626 to other operating
Mode
mode by select other operating mode.
2.4GHz (B): It forces the WNRT-626 to operate in 802.11b only.
2.4GHz (G): It forces the WNRT-626 to operate in 802.11g only.
2.4GHz (N): It forces the WNRT-626 to operate in 802.11n only.
Band 2.4GHz (B+G): It allows the WNRT-626 to operate in 802.11b and 802.11g
simultaneously.
2.4GHz (B+G+N): It allows the WNRT-626 to operate in 802.11b, 802.11g, and
802.11n simultaneously.
The ESSID (up to 32 printable ASCII characters) is the unique name identified in a
WLAN. The ID prevents the unintentional merging of two co-located WLANs.
ESSID
Please make sure that the ESSID of all stations in the same WLAN network are the
same. The default value is "default".

Chapter 6 Wireless Configuration

68