Table of Contents
Advertisement
5.3
DHCP
The Dynamic Host Configuration Protocol (DHCP) provides a centralized approach to
allocating IP addresses. It allows IP addresses to be dynamically assigned on an as
needed basis, from a pool of addresses. The DHCP function of the device is disabled
by factory default.
5.3.1 Enable DHCP
STEP 1: Click the DHCP tab.
STEP 2: Chose the entry and click the Start button
5.3.2 Disable DHCP
STEP 1: Click the DHCP tab.
STEP 2: Chose the entry and click the Stop button
34
Advertisement
Table of Contents
