Table of Contents
Advertisement
Chapter 5
5.1
ADSL Mode
The ADSL modes are: ANSI, G.DMT, G.LITE, MULTI. MULTI mode enables the device
to auto-adjust its mode to match the remote CO DLSAM. You can specify an ADSL
mode on this page, and click the Apply button to submit the settings.
5.2
VLAN
To configure the VLAN function, click VLAN from the Advanced menu bar. VLAN is
disabled by factory default. To enable it, tick Enable and click the Set button. Then
you can proceed to create the VLAN groups. The ATU-R supports four VLAN groups,
VLAN groups 1 to 4. You can choose and join different Ethernet ports to the PVC
running in RFC 1483 bridged mode. Packets will be transmitted or received from
these ports to the appointed PVC. The packets of the VLAN groups are not routable.
Packets that don't belong to the VLAN group are routable.
Parameters and buttons
The PVC field displays the options of the PVCs set up in RFC 1483 Bridged mode
(refer to section 5.4, WAN Setup). Click the Set button to apply the settings, or click
the Clear button to delete a VLAN group.
WEB Advanced Configuration
33
Advertisement
Table of Contents
