Mac Filter - Comtrend Corporation WAP-5813n User Manual

6.3 MAC Filter

This option allows access to the router to be restricted based upon MAC addresses.
To add a MAC Address filter, click the Add button shown below. To delete a filter,
select it from the MAC Address table below and click the Remove button.
Option Description
Select Select the wireless network name from the drop-down box. SSID
SSID stands for Service Set Identifier. All stations must be configured with
the correct SSID to access the WLAN. If the SSID does not match, that
user will not be granted access.
MAC Disabled: MAC filtering is disabled.
Restrict Allow: Permits access for the specified MAC addresses.
Mode Deny: Rejects access for the specified MAC addresses.
MAC Lists the MAC addresses subject to the MAC Restrict Mode. A maximum
Address of 60 MAC addresses can be added. Every network device has a unique
48-bit MAC address. This is usually shown as xx.xx.xx.xx.xx.xx, where
xx are hexadecimal numbers.
After clicking the Add button, the following screen appears.
Enter the MAC address in the box provided and click Save/Apply.
51