Connecting The Camera To Your Computer - JVC GV-LS2 User Manual

Connecting the Camera to Your Computer

To set up the camera, first connect it to your computer.
Required operating environment
Browser: Internet Explorer 9 or later
1 Attach the LAN cable to the unit.
RESET
DIRECT WLAN
ETHERNET
2 Connect the camera to your computer via the LAN cable.
3 Set the network mode switch to "LAN(OFF)".
MIC
RESET
DC
DIRECT WLAN LAN(OFF)
AV
ETHERNET
DIRECT WLAN LAN(OFF)
• If the network mode switch is set to [DIRECT] or [WLAN], the LAN terminal cannot be used.
• While the power is on, switching the network mode switch does not change the setting.
MIC
DC
LAN(OFF)
AV
11