Flow Of Connection/Setup; Starting Shooting; Pantilter - JVC GV-LS2 User Manual

Flow of Connection/Setup

Connect the unit to the computer, and configure the appropriate settings on a browser.

Starting shooting

1 Connect the camera to your computer via the supplied LAN cable. ( ➭ page 11)
To set up the camera, first connect it to your computer.
2 Connect the AC adapter. ( ➭ page 12)
Connect the supplied AC adapter when the connections are complete.
3 Access the unit from a browser to configure the appropriate settings. ( ➭ page 15)
Set the password, image quality, connection destination, etc. Configuring the correct settings allows you to
view recorded data on a computer or smartphone.
4 Secure the camera to the pantilter. ( ➭ page 25)
Secure the camera to the pantilter.
• Attach an optional item if necessary.
Insert/Attach an SD card ( ➭ page 28), battery ( ➭ page 29), external mic ( ➭ page 30), and AV cord (
➭ page 31).
• See "Establishing a wired connection" (page 27) to connect the unit with the LAN cable.
10