Table of Contents
Advertisement
Connection/Installation
Mounting the Camera
When mounting the camera on a fixer, pan/tilt and the like, use the
camera-mounting screw hole located on the camera-mounting bracket.
(Length of screw: 7 mm or less)
Camera-mounting
screw hole
Rotation-preventive
hole
Use a camera-mounting screw with a length shorter than 7 mm
Note
from the camera-mounting face. Use camera-mounting bracket
fastening screws with length shorter than 6 mm. Do not use a
screw that is longer than the specified length. It may damage
the internal parts.
Mounting the Camera-Mounting Bracket on Top of the Camera
The camera-mounting bracket is originally mounted at the bottom of the
camera before shipment but it can also be mounted on top of the camera.
1 Remove the camera-mounting bracket fastening screws (x2).
The camera-mounting bracket is removed from the camera.
2 Mount the camera-mounting bracket on top of the camera.
3 Mount the camera onto a fixer, pan/tilt unit and the like.
Camera-mounting bracket
1
Camera-mounting bracket
fastening screws
E-20
Camera-mounting bracket fastening
screws (x2: M2.6 x 6 mm)
Camera-mounting bracket
2
3
MAX.
7 mm
Advertisement
Table of Contents
