JVC GV-LS2 User Manual page 84

If WPS is Supported
1. Switch the network mode to 'WLAN' .
2. Connect the AC adapter.
3. Activate WPS on the wireless LAN router.
Refer to your wireless LAN router's user manual for how to activate WPS.
4. Hold down the WPS button.
Once the WPS button stops blinking, connection is complete.
Note
WPS button does not work during start up.
(The Record button will blink red during start up.
Wait for the Record button to stop blinking, then hold down the WPS button.)
RESET
DIRECT WLAN LAN(OFF)
ETHERNET
RESET
DIRECT WLAN LAN(OFF)
ETHERNET
8
MIC
DC
AV
MIC
DC
AV