Connecting an External Mic
Connect an external mic to record external sounds.
Connect a commercially available mic to the MIC terminal of the pantilter when it is attached, or of the camera when
not attached.
• Use the plug-in power type.
• Do not use microphone with L-shaped connectors.
• Turn off the power before connecting/disconnecting the mic.
• Without an external mic, the internal mic can record ambient sounds.
• When the sounds are too loud or too low, change the "MIC LEVEL SETTING". ( ➭ page 45)
Connecting to the camera
RESET
DIRECT WLAN
ETHERNET
Attaching to the hot shoe
1
Remove the hot shoe cover.
2
Attach the mic.
30
MIC
DC
LAN(OFF)
AV
Mic (commercially available)
f3.5 mm stereo mic jack
Connecting to the pantilter
MIC
PLUG IN
AV
EXTEND
DC
POWER
Mic (commercially available)
f3.5 mm stereo mic jack