JVC GV-LS2 User Manual page 91

If Connection Fails
If connection fails, check the following:
● If you are unable to locate the router
⇒ Check your router name (SSID).
Refer to the user manual or, in some cases, default settings may be
printed on a sticker on the router itself.
⇒ Make sure the router is not set to Stealth Mode.
(This Mode hides the SSID)
● If you are unable to connect to WPS:
⇒ Follow the steps described in your router's user manual to connect with
WPS. (Some devices have specific steps that need to be followed to
activate WPS.)
● If you are unable to connect even after entering the password:
⇒ Check that the password for the router is correct.
⇒ Make sure that the Network Mode is switched to WLAN.
(Always turn the camera power OFF before switching the Mode. The
Mode will not be switched if you move it while the camera is still ON.)
15