Connecting The Ac Adapter; Removing The Pantilter - JVC GV-LS2 User Manual

Connecting the AC adapter

Connect the supplied AC adapter to the DC connector
of the pantilter.
• Be sure to unlock the pantilter before
connecting the AC adapter. ( ➭ page 7)
• Remove all tape from the pantilter.
AC adapter (supplied)
• After connecting the AC adapter, the power turns on
and the pantilter moves automatically for position
adjustment. The pantilter moves everytime the unit
is turned on.
• The power lamp blinks when the position adjustment
fails. Turn off the unit and turn it on again for
readjustment. (The position adjustment may have
failed even if the power lamp is not blinking.)
26
MIC
RESET
DC
DIRECT WLAN LAN(OFF)
AV
ETHERNET
MIC PLUG IN AV EXTEND DC
POWER
Conversion cable (supplied)

Removing the pantilter

To use the camera alone ( ➭ page 32), remove the
pantilter.
1 Loosen the camera fixing screw sufficiently.
M IC
PL UG
PO WE IN
R
AV
EX TE
N D
2 Hold the unit and pantilter, and pull it straight up.
When the pantilter is not used, connect the AC adapter,
AV cord, and external mic to the camera itself.
D C