JVC GV-LS2 User Manual page 85

If WPS is Not Supported
1. Use the supplied LAN cable to connect your camera to the computer:
(1) Connect the LAN cable to the camera.
(2) Switch the network mode to 'LAN(OFF)' .
(3) Connect the AC adapter.
• A LAN cable cannot be used when the network mode is switched to 'DIRECT' or 'WLAN' .
• Settings will not be changed unless you turn the power OFF before switching the
network mode.
RESET
ETHERNET
RESET
DIRECT WLAN
ETHERNET
RESET
DIRECT WLAN LAN(OFF)
ETHERNET
RESET
DIRECT WLAN
ETHERNET
DIRECT WLAN LAN(OFF)
MIC
DC
LAN(OFF)
AV
MIC
DC
AV
MIC
DC
LAN(OFF)
AV
9
MIC
DC
AV