JVC GV-LS2 User Manual page 100

Distribution on Ustream
Once JVC CAM Control is installed onto a computer running Windows,
JVC CAM Driver is installed at the same time.
Images from the camera can be streamed via Ustream using JVC CAM
Driver and Ustream Producer (http://ustream.tv/producer/) together.
Preparation
• Install JVC CAM Driver (for Windows) and Ustream Producer onto
your computer.
• Connect your camera to the Wi-Fi LAN router.
Make sure your camera and computer are connected to the same
router.
• For how to connect your camera to the router,
see 'Connecting Wirelessly to Wi-Fi LAN Router' on page 7.
• To connect 2 or more cameras via ethernet, you should change the IP
addresses of each cameras to the value that does not overlap.
Or you may use 'AUTO' setting(DHCP). In that case, cameras obtain IP
addresses from your router automatically.
See 'Change the camera's IP address setting to 'AUTO'' on page 22.
Required Settings
1
Changing the Streaming setting
⇒ Go to page 25 .
2
Registering your camera in JVC CAM driver
⇒ Go to page 27.
3
Adding your camera to Ustream Producer
⇒ Go to page 29.
24