Table of Contents
Advertisement
NVS480R User's Guide
IP Filtering: You can restrict the access to the administrator page utilizing IP address filtering.
- Restrict Administrator Access: Check this box to restrict administrative logon privileges.
- Base IP Address: Input an IP address of the PC that will be used for administrative access.
- Mask: This is the same as the subnet mask. It is used to allow administrative logon only from
PCs located in the same subnet as the base IP address. If only one PC is allowed to access the
administrative mode, set this value to 255.255.255.255.
5.4. User Admin & Time Setup
You can change the ID and password of users and also assign different attributes for each user.
-User Administration
- Administrator
Username: Admin ID. Default ID is "root"
Password: Admin password. The default password is "root".
Confirm Password: Enter the password once more to confirm the password.
If you have forgotten the Administrator's ID and password, the only means of recovery is
to reset the settings to factory default. Doing so will erase your previous settings.
-
Add User
Username: Enter the user ID you want to add. Up to 100 users are supported by NVS480R.
Password: Enter the user password.
Attribute: You can set different system resource access capabilities for each of the users.
Attributes are Audio, Bi-directional Audio, and Pan/Tilt.
For example, if you want a specified user to hear the audio from the NVS480R, check
the Audio check box.
-
User List:
You can list "user ids" and " their attributes" here.
List formats are as follows: user id [A, BA, P]: A – audio, BA – bi-directional audio, P – P/T/Z.
You can delete specific users by selecting and clicking the "DELETE" button.
Authentication for
Viewing:
check the "Yes" box and click "Save". Users will need to input their User ID and password to
connect to the NVS480R in viewing mode. (Figure 5-6.)
Figure 5-5. User Admin. & Time Setup
If you want to restrict viewing access to the NVS480R,
- 26 -
Advertisement
Table of Contents
