NVS480R User's Guide
3.2. Connecting to an xDSL Modem
1. After power on, connect the NVS480R to a PC or Notebook via a crossover CAT 5 network cable
provided with the system.
2. Set up network parameters by running the "IP-Installer."
3. Remove the CAT 5 crossover network cable to the PC or Notebook and connect the NVS480R to the
network using a standard CAT 5 network cable. Verify the connection by using the NVR100 network video
Figure 3-2. Direct Connection Using a Crossover LAN Cable
Figure 3-3. Connecting the NVS480R to xDSL
- 15 -
Regular LAN or crossover
LAN cable
②