Physical Description - Inscape Data AirGoggle NVS 480R User Manual

NVS480R User's Guide

2.3. Physical description

2.3.1. Front panel
URGENT Switch
Press this button switch to start or stop manual recording in urgent condition. The recording
status will change upon pressing the switch. There are two pins to connect extended switch
for the same purpose at the rear panel.
Status indicator:
As shown in Figure 2-1, there are three status indicator LEDs. From left to right they are HDD, LAN and
Power.
HDD: HDD access indicator. The LED turns on when the HDD is busy.
LAN: Link indicator. A continuous green light means that the LAN is in a normal state. When there is
traffic on the LAN, an orange light flickers.
Power: The status indicator shows the status of the NVS480R in three different colors.
1 Green: The green light indicates that the NVS480R is operating properly. If the green light is
continuously on, it means that the NVS480R is ready to transmit data via network. If the
green light blinks, it means that there is traffic between the LAN and the NVS480R.
2 Red: The red light indicates that the hardware of the NVS480R is not operating properly.
3 Orange: The orange light indicates that the software of the NVS480R is not operating properly.
When applying power to the NVS480R, the power indicator temporarily lights on
with a red color and then returns to green. This is normal.
Figure 2-1. Front Panel of the NVS480R
- 9 -