Connecting To Cable Modem - Inscape Data AirGoggle NVS 480R User Manual

NVS480R User's Guide
software to see if the video source is viewable.
In most cases when connecting the NVS480R to an xDSL Modem, a standard Ethernet
network cable is required. But since a few xDSL Modems use crossover connections,
please verify the interface with your Modem manufacturer.
3.3. Connecting to a Cable Modem
1. Apply power and connect the PC and NVS480R together via the crossover cable provided with the
system.
2. Set up network parameters by running the "IP-Installer". (Refer to Figure 6).
3. Remove the crossover cable and connect the NVS480R to the network using a standard LAN cable as
shown in Figure 3-5. Check if you can receive video data when connecting to the NVS480R using the
viewer program.
Figure 3-4. Direct Connection Using a Crossover LAN
- 16 -