Inscape Data AirGoggle NVS 480R User Manual page 35

NVS480R User's Guide
NOTE: To apply the Factory Default Setting, you should reset the system.
Once the NVS480R is re-initialized to the factory default state, it should be set up
again using the IP-Installer.
System Reset: Perform a remote reset by clicking the "CONFIRM" button.
All users logged on to the NVS480R will be disconnected upon reset. The NVS480R
does not resume the connections automatically. The users must re-connect to the
server manually.
NOTE: To apply the upgraded S/W, you should reset the system after the system S/W upgrade.
- 35 -