Advertisement
Quick Links
Advertisement
Related Manuals for Inscape Data AirGoggle NVS 460
Summary of Contents for Inscape Data AirGoggle NVS 460
- Page 1 Quick Reference Guide Rev.1.0...
- Page 2 Please make sure the following items are in the box. Content Description Remark NVS460: 1CH server NVS480: 4CH server Main product body NVS (Network A/V Server) NVS480R: 4CH DVR (HD: 120GB) Input: 100~250V 50-60Hz Power Adapter Output: +12V, 2.0A AC Power Cable AC 250V, 10A~16A direct connection...
- Page 3 NVS460 NVS480/480R POWER: Status indicator shows the status of the NVS in three different colors. 1 Green: The green light indicates that the NVS is operating properly. If the green light is continuously on, it means that the NVS is ready to transmit data via network. If the green light blinks, it means that there is traffic between the LAN and NVS.
- Page 4 NVS480 Factory Default Reset NVS480R MIC/LINE IN: Interfaces to external audio device / microphone LINE OUT: Interfaces to connect external speaker with amplifier 10BaseT: 10Mbps Ethernet interface for NVS460 10/100BaseT: 10/100Mbps Ethernet interface for the NVS480, NVS480R DC12V: DC 12V power supply to the unit ALARM IN/OUT &...
- Page 5 ② Install the IP-Installer program ③ Assign an IP address to the NVS product Figure 2-1 Connecting the NVS and a PC by using a cross type LAN Cable ① Apply power to the installation PC and start Windows OS. ②...
- Page 6 ② Network Adapter Selection on Window 2000 or XP When using Windows 2000 or XP, the PC will ask you to select the proper network adaptor as in Figure 2-3. It is important to select the right packet driver for the network adaptor. If the PC is configured to support more than one network (e.g., various MODEM, IEEE1394, etc), the PC can crash by selecting wrong packet driver.
- Page 7 Automatic”. Settings can vary depending on this “Network Mode”. This Guide will explain only “LAN Static” mode in which the PC and the product are directly connected by a crossover type LAN cable. Please refer to the user manuals on the included CD for detailed information on network modes besides “LAN Static”.
- Page 8 Insert the installation CD in the CD-ROM drive of the PC and select “NVR100.exe” located in the “NVR100 Software” directory. The NVR100 program will automatically be installed. Double-click the icon ① To start the program, . This will launch the NVR100 program as shown in Fig 3-1.
-
Page 9: Reference Guide
④ Click the start button , then the live video connected to the unit will be transmitted and shown as in Fig 3-3. Fig 3-3. Showing Live Images via the NVR100 Rev.1.0... - Page 10 This unit is designed to be accessed via your favorite web browser, in addition to the NVR100. In order to access the unit through the web browser, you must type in the appropriate IP address. Fig 3-4 is an example of accessing the unit via the browser. Fig 3-4.