Table of Contents
Advertisement
NVS440R User's Guide
"
IP Filtering
: You can restrict the access to the administrator page utilizing IP address filtering.
- Restrict Administrator Access : Check this box to restrict administrative log on priviledges.
- Base IP Address : Input an IP address of the PC which will be used for administrative access.
- Mask : This is same as subnet mask. It is used to allow administrative log on only from PCs located in the
same subnet as the base IP address. If only one PC is allowed to access the administrative mode, set
this value to 255.255.255.255.
5.4. User Admin & Time Setup
You can change the ID and password of users and also assign different attributes for each user.
-User Administration
- Administrator
Username : Admin ID. Default ID is "root"
Figure 5-5. User Admin. & Time Setup
- - - - 26
26 - - - -
26
26
Advertisement
Table of Contents
