Table of Contents
Advertisement
NVS480R User's Guide
5.1.3. Controlling the DVR
When the NVS480R is connected through the NVR100 Software or an Internet browser, it is connected as an
A/V server. In this mode, the NVS480R functions as a real-time streaming A/V server to the client. A user
having the privilege of administrator can enter into DVR control mode by pressing the
button.
The DVR software will execute as shown in the previous picture, Fig.5.1(B). The built-in security feature only
allows one user to be connected as a DVR administrator. Refer to the NVR100 Software User's Guide included
in this CD-ROM for more detailed information on DVR control.
5.1.4. User ID and Password
When initially logging in to the NVS480R, a window prompt for your User Name and Password
appears as shown below in Figure 5-2.
Figure 5-2. Log On Screen
The factory default User Name and Password are set as 'root' and 'root', respectively. Click on the "OK" button to
enter into the Basic Setup page of Admin Mode. If you have changed the username and password of the
Administrator, you must log on with the changed username and password.
- 20 -
Advertisement
Table of Contents
