Network Configuration - Inscape Data AirGoggle NVS 480R User Manual

NVS480R User's Guide

5.3. Network Configuration

Set up the network parameters appropriately in accordance with your network environment. Many of the
parameters on this page are the same as those used by the "IP-Installer".
IP Assign Type: The network connection types supported by the NVS480R are Static, PPPoE, and DHCP.
- Select 'Static IP Setup' for static IP address configuration and enter the IP address, Subnet Mask,
Gateway, DNS1 and DNS2 into the appropriate field. Typically, these values will be assigned by the
network administrator or ISP provider. DNS2 is used when DNS1 is unreachable and is recommended.
- Select 'PPPoE' in the network connection type if the NSV480R will be directly connected to a WAN.
Figure 5-4. Network Configuration
- 24 -