Inscape Data AirGoggle NVS 480R User Manual page 42

NVS480R User's Guide
6.4. How to Replace the Hard Disk on NVS480R
The NVS480R has a hard disk that can be replaced when needed. To replace the hard disk, follow the
procedures described below.
1. Remove the 4 screws joining the front panel to the body of the NVS480R.
2. After removing the front panel, you can find the power cable and the IDE flat cable connected to the hard disk
at the center of the housing.
3. At the bottom of the housing, there are 4 screws. Remove the screws.
- 42 -