Inscape Data AirGoggle NVS 480R User Manual page 43

NVS480R User's Guide
4. Carefully slide the Hard Disk Drive out from the chassis.
NOTE: Any shock induced to the Hard Drive may result in damage.
5. Unplug the IDE cable from the Hard Disk.
6. Install a new hard disk and follow the reverse procedure from step 5 back to step 1.
7. Format the New Hard drive by using the format command of the NVR100 Software. If the Hard Drive has
already been previously formatted by the NVR100, then this is not necessary.
- 43 -