Connecting The Nvs480R; Connection To A Lan - Inscape Data AirGoggle NVS 480R User Manual

NVS480R User's Guide

3. Connecting the NVS480R

The NVS480R supports LAN, xDSL, and Cable modems. It also supports a shared IP network where a single
public IP address is shared by many internal network clients. Refer to the [IP-Installer User's Guide] for
details on setting the IP address for the NVS480R.
3.1. Connecting to a LAN
Typically the NVS480R is connected to a LAN as follows:
Figure 3-1. Connecting the NVS480R to a LAN
1. After power on, connect the NVS480R to a LAN.
2. Assign an IP address to the NVS480R by using the IP-Installer. Make sure the PC running the IP-Installer is
in the same subnet as the NVS480R.
3. Check if video streams can be viewed with the NVR100 software.
- 14 -