Table of Contents
Advertisement
NVS480R User's Guide
Typically xDSL or broadband service providers will need this setting.
'Password' fields with the values assigned by the Internet service provider.
- When the network connection type is "automatic IP allocation by DHCP", select 'DHCP' in the network
type.
Refer to the [IP-installer user's guide] for "Clone MAC".
Refer to the [IP-installer user's guide] for "Host name and domain for Cable Modem".
E-Mail Setup
- Recv E-Mail Address: Refer to [IP-installer user's guide] for "Recv E-Mail Address".
- Return E-Mail Address: Refer to [IP-installer user's guide] for "Return E-Mail Address".
- Notify for IP Changed: If you check this, the IP address will be sent via E-mail to this address whenever
- Title: Is the predefined subject of the e-mail message sent to the user.
- Message: Is the pre-defined content of the e-mail message sent to the user.
You can change the HTTP port, RTSP port, RTCP, and WebHdd port numbers. The RTSP port
Port Change:
is used to connect the "Viewer" to the NVS480R. WebHdd is the port number to control
access to the user data storage on the HDD of the NVS480R.
Each port should have a number below # 65535.
- HTTP: default "80"
- RTSP: default "554"
- RTCP: default "6971"
:
-
WebHdd
default "6971"
Management Server: This feature enables the built-in dynamic DNS client to automatically update the
IP address of the NVS480R to a remote management web server.
mgmt.AirGoggle.com is a free Dynamic DNS registration server for the NVS480R.
A simple web management interface keeps all your network cameras and servers in
one easy to track interface. This is a great option if you have multiple cameras
and are using a Dynamic DNS.
the IP address of the NVS480R changes.
- 25 -
Fill in the 'User Name' and
Currently,
Advertisement
Table of Contents
