Table of Contents
Advertisement
NVS440R User's Guide
3.2. Connecting to xDSL Modem
1. After power on, connect the NVS440R to a PC or Notebook via a crossover CAT 5 network cable
provided with the system.
2. Setup network parameters by running "IP-Installer."
3.Remove the CAT 5 crossover network cable to the PC or Notebook and connect the NVS440R to the
network using standard CAT 5 network cable. Verify the connection by using the NVR100 network video
software to see if the video source is viewable.
Figure 3-2. Direct connection using crossover LAN cable
NVS440R
Figure 3-3. Connecting the NVS440R to xDSL
- - - - 15
NVS440R
Regular LAN or crossover
LAN cable
15 - - - -
15
15
② ② ② ②
Advertisement
Table of Contents
