Table of Contents
Advertisement
NVS440R User's Guide
3. Connecting the NVS440R
NVS440R supports LAN, xDSL, and Cable modem. It also support shared IP network where single public IP
address is shared by many internal network clients. Refer to
the IP address for the NVS440R.
3.1. Connection to a LAN
Typically the NVS440R is connected to a LAN as follows:
1. After power on, connect the NVS440R to a LAN.
2. Assign an IP address to the NVS440R by using the IP-Installer. Make sure the PC running the IP-Installer is
in the same subnet as NVS440R.
3. Check if video streams can be viewed with NVR100 software.
NVS 440R
Figure 3-1. Connecting the NVS440R to LAN
- - - - 14
14 - - - -
14
14
[IP-Installer User's Guide]
for details of setting
Advertisement
Table of Contents
