Setting The Time On The Digital; Programming The Digital - Valcom V-D11025A Installation And Programming Manual

Programming
Setting the Time on the Digital Clock
1. To set the time, press the top button to change the hour and/or the bottom button the set the minute.
Programming the Digital Clock
Use the following options to program a once-a-day pulse output. Enter the programming mode by pushing the "Set Hour" and "Set Minute"
buttons at the same time. The AM/PM indicator in the upper left corner will start blinking indicating that you are in programming mode.
Note: in order to program these following options, option 30 must first be set to "E" and option 31 must be set to "09".
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
Set Hour
Set Minute
Option 1 - Set Year:
Use the bottom button to scroll from "00-99" on the display and set
the year.
Option 2 - Set Month:
Use the bottom button to scroll between "01-12".
Option 3 - Set Day:
Use the bottom button to scroll between "01-31".
540-563-2000 P.
540-362-9800 F.
www.valcom.com
17