Reset Settings - Konica Minolta C652 User Manual

7.1 System Settings
7.1.9

Reset Settings

Configure auto reset settings.
0 All settings performed in the following tabs during operation using the copy function are automatically
reset to the initial settings after the specified time has elapsed.
Basic tab, Original Setting tab, Quality/Density tab, Application tab
0 Even if [OFF] is selected for System Auto Reset Time, the system auto reset function operates when
this machine is not used for one minute during user authentication/account track operations.
%
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Reset Settings].
Settings
System Auto Reset
Auto Reset
Job Reset
bizhub C652/C552
Priority Mode Configure a mode to be displayed in the system
auto reset mode.
System Auto Reset Configure whether to perform system auto reset.
Time Specify a time until the initial screen appears if
this machine is not operated. The specified time
is not canceled.
Configure whether to perform auto reset in the selected mode.
Specify a time until the basic settings screen appears and the settings are
reset to the initial values if this machine is not operated.
When Account is Configure whether to reset the settings when you
changed log off if the user authentication or account track
settings have been configured.
When original is set Configure whether to reset the settings when an
on ADF original is loaded in the ADF.
Next Job Configure whether to reset the following settings
when the next job is selected.
•
•
•
The destination of data is always reset.
d
Reference
If user authentication or enhanced se-
curity mode is enabled, the adminis-
trator settings mode or user
authentication mode is logged off ac-
cording to the setting for System Auto
Reset Time.
In the enlarge display mode, the sys-
tem auto reset mode is disabled.
Staple Setting
Original Set/Bind Direction
Reset Data After Job
7
7-19