Global Services And Support; Warranty Information - Intermec PC23 User Manual

Before You Begin

Global Services and Support

xii
• Do not spray the printer with water. If you are using a hose to
clean the premises in an industrial environment, remove the
printer or carefully protect it from spray and moisture.
• You must implement both hardware and software safety
precautions to prevent the possibility of undefined system states.
• You must ensure that dangerous conditions cannot occur under
any circumstances, even for a brief period of time.
• Observe all safety and accident prevention regulations applicable
to your specific region and application.
• Before you use a cleaning card, carefully read the warning text on
the envelope.
• Replace only with same type and rating of fuse to ensure
continued protection against risk of fire.
• If you are using the printer with the Battery Base:
Risk of explosion if battery is replaced by an incorrect type.
•
• Use of another battery may present a risk of fire or explosion.
• The battery may present a fire or chemical burn hazard if
mistreated. Do not disassemble the battery, heat above 100 °C
(212 °F), or incinerate.
• Dispose of any used batteries according to the instructions.
Note: This equipment may be used on an IT power system.

Warranty Information

To understand the warranty for your Intermec product, visit the
Intermec web site at
Returns and Repairs > Warranty.
www.intermec.com
PC23 and PC43 Desktop Printer User Manual
and click Support >