Indication In Osd - Christie LX501 Manual

Using the menu function (continued)
To close the MENU, press the MENU button again or select EXIT and press
3.
the ◄ cursor button or ENTER button. Even if you do not do anything, the
dialog will automatically disappear after about 30 seconds.
NOTE • If you want to move the menu position,
use the cursor buttons after pressing the POSITION
button.
• Some functions cannot be performed when a certain
input port is selected, or when a certain input signal is
displayed.
• When you want to reset the operation, press RESET button on the remote
control during the operation. Note that some items (ex. LANGUAGE, VOLUME)
cannot be reset.
• In the ADVANCED MENU, when you want to return to the previous display,
press the ◄ cursor button or ESC button on the remote control.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
Indication
EXIT
RETURN
CANCEL or NO
OK or YES
LX501/LX601i User Manual-Operating Guide
Selecting this word finishes the OSD menu. It's the same as
pressing the MENU button.
Selecting this word returns the menu to the previous menu.
Selecting this word cancels the operation in the present
menu and returns to the previous menu.
Selecting this word executes the prepared function or shifts
the menu to the next menu.
Meaning
39
Operating
POSITION
button
020-000461-01 Rev. 1 (03-2012)