Christie LX501 Manual page 15

Connecting with your devices (continued)
• The HDMI ports of this model are compatible with HDCP (High-band-
NOTE
width Digital Content Protection) and therefore capable of displaying video
signals from HDCP compatible DVD players or the like.
- The HDMI ports support the following signals:
Video signal : 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60,
1080i@50/60, 1080p@50/60
Audio signal : Format Linear PCM
Sampling frequency 48kHz / 44.1kHz / 32kHz
- This projector can be connected with another equipment that has HDMI
connector, but with some equipment the projector may not work properly,
something like no video.
- Be sure to use an HDMI
- Use a Category 2-certified HDMI
projector.
- When the projector is connected with a device having DVI connector, use a
TM
DVI to HDMI
• The HDMI TM cables might come off easily due to the lack of a mechanical lock
on the cables and connectors. It is recommended to fasten the cables to the
projector to prevent the cables from coming off (
(continued on next page)
LX501/LX601i User Manual-Operating Guide
56)
(
27)
(
TM
cable that has the HDMI
cable to connect with the HDMI
27, 51)
(
27)
(
TM
cable to input 1080p@50/60 signal to the
TM
input (
15, 16).
13
Setting up
VCR/DVD/
Blu-ray Disc
player
TM
logo.
Setup Guide).
020-000461-01 Rev. 1 (03-2012)
TM
TM