Christie LX501 Manual page 87

Item
PRESENTATION
(continued)
SERVICE
LX501/LX601i User Manual-Operating Guide
• To change from Single PC mode to Multi PC mode,
press ► button to choose OK in the dialog and press
the ENTER or INPUT button.
The display mode is changed.
• For details on how to switch the display mode to Multi
PC mode on your computer, refer to the manual for
"LiveViwer".
MULTI PC
• The Presenter mode setting of the selected
MODE
computer becomes valid when the display mode is
(continued)
changed to Single PC mode.
Also, the Presenter mode setting
becomes invalid when the
display mode is changed to Multi
PC mode, regardless the setting
on the computers.
For details, refer to the manual for "LiveViewer".
Selecting this item displays the user name. This
function helps you identify from which computer the
DISPLAY current image is sent.
USER NAME • You can set a user name for each computer on
"LiveViwer". For details, refer to the manual for
"LiveViewer".
Executing this item restarts and initializes the network functions.
Choose the NETWORK RESTART EXECUTE using the button ►.
Then use the button ► to execute.
Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting NETWORK RESTART EXECUTE, NETWORK menu
may not be controlled approx. 30 seconds.
Description
85
SECURITY menu
020-000461-01 Rev. 1 (03-2012)