Christie LX501 Manual page 14

Setting up
Connecting with your devices (continued)
Access
point
75)
(
USB
wireless
adapter
(optional)
75)
(
USB
storage
device
93)
(
CAUTION ► Before connecting the projector to a network system be sure to
obtain the consent of the administrator of the network.
►Do not connect the LAN port to any network that might have the excessive voltage.
►The designated USB wireless adapter that is sold as an option is required to use
the wireless network function of this projector.
►Do not use any extension cable or device when connecting the adapter to the
projector. Before you insert or pull out the USB wireless adapter from the projec-
tor, turn off the power of the projector and pull out the power cord's plug from the
outlet. Do not touch the USB wireless adapter while the projector is receiving AC
power.
►Before removing the USB storage device from the port of the projector, be sure to
use the REMOVE USB function on the Thumbnail screen to secure your data (
►To connect both the LAN cable and USB device to the projector, use only the
further USB TYPE A port from the LAN port or a LAN cable that is flat on the
side where the plug's wire is visible. Otherwise, both of them cannot be con-
nected correctly, or the wire may break (malfunction).
NOTE • If an oversized USB storage device blocks the LAN port, use only
the further USB TYPE A port from the LAN port or a USB extension cable to
connect the USB storage device.
(continued on next page)
LX501/LX601i User Manual-Operating Guide
20)
(
75)
(
Computer
12
External
device
96).
020-000461-01 Rev. 1 (03-2012)