Table of Contents
Advertisement
1 Basic Safety Instructions
The CGW is exclusively designed for the cutting of construction products mainly on construction
sites.
Uses other than the manufacturer's instructions shall be considered as contravening the regulations.
The manufacturer shall not be held responsible for any resulting damage. Any risk shall be borne
entirely by the user. Observing the operating instructions and compliance with inspection and
servicing requirements shall also be considered as included under use in accordance with the
regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following
symbols are used on the machine:
Read operator's instructions
Hand protection must be worn
Rotation direction of the blade
Danger: risk of cut
6
Ear protection must be worn
Eye protection shall be worn
Pump on
Pump off
Advertisement
Table of Contents
