Configuring Alarm Relays With Enervista Secure Web Management Software - GE Multilink ML3000 Instruction Manual

CHAPTER 18: MISCELLANEOUS COMMANDS

18.1.3 Configuring Alarm Relays with EnerVista Secure Web Management software

MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
To customize the alarm relays,
 Select the Configuration > Alarms menu item.
Each alarm can be enabled or disabled form the screen shown above. All alarms can be
enabled or disabled using the Alarm Status drop down menu. Relay closure times can be
set using the drop down menu.
 After changing the Alarm settings, save the configuration using the
save icon (
MISCELLANEOUS COMMANDS
),
18–5